A. 50°C
B. 80°C
C. 100°C
D. 150°C

Advertisement

Related Mcqs:

  1. The changes in volume of transformer cooling oil due to variation of atmospheric temperature during day and night is taken care of by which part of transformer?
    A. Conservator B. Breather C. Bushings D. Buchholz relay...
  2. Which of the following is the main advantage of an auto-transformer over a two winding transformer?
    A. Hysteresis losses are reduced B. Saving in winding material C. Copper losses are negligible D. Eddy losses are totally eliminated...
  3. The dielectric strength of transformer oil is expected to be______________?
    A. lkV B. 33 kV C. 100 kV D. 330 kV...
  4. A transformer oil must be free from________________?
    A. sludge B. odour C. gases D. moisture...
  5. The transformer oil should have _______ volatility and _______ viscosity?
    A. low,low B. high,high C. low,high D. high,low...
  6. The no-load current drawn by transformer is usually what per cent of the full-load current ?
    A. 0.2 to 0.5 per cent B. 2 to 5 per cent C. 12 to 15 per cent D. 20 to 30 per cent...
  7. The transformer ratings are usually expressed in terms of______________?
    A. volts B. amperes C. kW D. kVA...
  8. The magnetising current of a transformer is usually small because it has___________?
    A. small air gap B. large leakage flux C. laminated silicon steel core D. fewer rotating parts...
  9. If a transformer is continuously operated the maximum temperature rise will occur in_______________?
    A. core B. windings C. tank D. any of the above...
  10. In a transformer the tappings are generally provided on_____________?
    A. primary side B. secondary side C. low voltage side D. high voltage side...
Advertisement